Trucks

Skateboard Trucks

Take a look at our selection of skateboard trucks from the most renowned brands and choose the ones that suit your needs. We're confident you'll find the perfect set of trucks for you!

Note: All trucks are sold in pairs, and the price always refers to a pair of trucks.

Skateboard Trucks Buying Guide

Choosing skateboard trucks can often feel confusing, as manufacturers use different measurement systems, making it harder to select the right product. Additionally, many terms used to describe trucks, such as "bushings", "hanger", "baseplate", "kingpin", and others, might not be familiar to those new to skateboarding.

This guide was created to help beginners purchase the right trucks for their skateboard by providing a detailed analysis of the relationship between trucks, wheels, and the deck.

What Parts Make Up a Skateboard Truck

Trucks are fundamentally composed of two main parts: the baseplate and the hanger with the axle where the wheels are attached. These two parts are connected by a bolt called the Kingpin, which also secures the bushings (also known as cushions), responsible for the skateboard's turning capability.

Additionally, there are other small components that contribute to the proper functioning of the truck. Let’s examine them in detail.

Componenti del truck da skateboard
  1. Kingpin Nut
  2. Bushing Washer
  3. Upper Bushing
  4. Axle
  5. Washers or Speedrings
  6. Axle Nut
  7. Hanger
  8. Lower Bushing
  9. Kingpin Bolt
  10. Pivot Cup
  11. Baseplate

Baseplate

The baseplate is the metal plate that is bolted underneath the skateboard deck with four screws. The baseplate also houses the pivot cup and the kingpin bolt.

Hanger

The hanger is the triangular-shaped metal component that encases the truck's axle. The conical bottom part of the hanger is called the pivot, which sits inside the pivot cup located on the truck’s baseplate. The hanger is the central element necessary for turning and grinding.

Axle

The axle is a metal rod housed within the hanger. The two ends of the axle feature threads that allow the wheel nuts to be securely fastened.

Kingpin Bolt

The kingpin is the bolt that connects the hanger to the truck’s baseplate. The bushings, which allow the skateboard to turn, and the washers are mounted on the kingpin. The end of the kingpin is referred to as the kingpin nut. The steering tightness can be adjusted by tightening or loosening the kingpin nut.

Speedrings

Speedrings are small metal washers placed on the truck’s axle. They match the inner diameter of skateboard bearings and reduce friction between the bearing and the support or axle nut.

Bushings

Bushings are polyurethane cushions mounted on the kingpin bolt. Together with the kingpin tension, they control the skateboard’s turning capability.

Bushings come in various hardness levels. The harder the bushing, the stiffer the turn will be. Conversely, softer bushings allow for more forgiving turns.

All trucks available in our online skate shop come with bushings installed. However, if you find them too soft or too hard, instead of adjusting the kingpin bolt excessively and risking damage, consider replacing them. You can find a wide selection of bushings in our online store.

Washers

Washers are metal discs positioned both above and below the bushings. They ensure that the forces acting on the bushings are evenly distributed and help restore the bushings to their original shape.

Pivot Cup

The pivot cup is a small plastic part located in the pivot recess of the truck’s baseplate. It facilitates smooth movement between the hanger and the baseplate, reducing friction and enhancing steering fluidity.

Choosing the Right Size Skateboard Trucks

When selecting trucks for your skateboard, it’s important to consider two factors:

  1. Size
  2. Height

Skateboard Truck Size

Truck manufacturers don’t use a standard unit of measurement to indicate truck size. Some measure the truck by the axle width, while others measure it by the hanger width. Additionally, sizes are sometimes listed in inches and other times in millimeters. It can get quite confusing!

To determine the right truck size, you need to know the width of your skateboard deck. The truck axle width should match the deck width as closely as possible to ensure optimal turning performance. A margin of +/- 0.125" is acceptable. For example, if you have an 8-inch deck, you should choose a truck with an axle width between 7.875" and 8.125". You can use the "Axle Truck" filter on our website to view all the trucks suitable for your needs. For every truck available in our online store, you can refer to the "size chart," which lists the truck size and the recommended deck width.

Why Choosing the Right Truck Size Matters

If your trucks have an axle that is wider than your deck, the wheels will stick out beyond the board, increasing the risk of wheel contact while pushing and causing you to lose balance. Conversely, if the axle width is narrower than the deck, you may experience difficulties turning, and the skateboard will be less stable and balanced.

Tavole da Skateboard e larghezza truck
  1. Truck axle width
  2. Skateboard deck width

Skateboard Truck Height

The height of a truck refers to the distance between the truck's baseplate and the hanger, the part that holds the wheels. It’s essential to choose the right truck height to match your wheels properly. Trucks are typically categorized into three height levels: low, medium, and high.

LOW TRUCK
(46 - 49 mm)

Truck Skateboard bassi

Low trucks are ideal for street or park skating because the deck is closer to the ground, offering greater stability. However, to avoid wheel contact with the deck (known as wheelbite) and potential falls, wheels should be small, up to 53mm. You can also use riser pads to increase the distance between the wheels and the deck, allowing for larger wheels.

MID TRUCK
(50 - 53 mm)

Truck Skateboard medi

Medium trucks are more versatile and suitable for all skateboarding styles. They accommodate slightly larger wheels, up to 56mm, and handle uneven surfaces better. Riser pads can also be used with medium trucks to fit even larger wheels.

HIGH TRUCK
(53.5 - 58 mm)

Truck Skateboard alti

High trucks provide more distance between the deck and the ground, enabling the use of larger wheels up to 60mm without risking wheelbite. They are excellent for performing ollies and taking sharp turns, though the deck may feel less stable at high speeds.

Why Choosing the Right Truck Height Matters

Choosing the correct truck height is essential for fitting the appropriate wheel size on your skateboard. The height of the truck determines the size of wheels you can use. Wheels that are too large may cause what’s known as "wheelbite," where the wheels rub against the deck. This can result in a bumpy landing during tricks or even an abrupt wheel stop at high speeds, potentially leading to a fall.

Here’s a quick summary of the relationship between truck height and the diameter of wheels you can use:

  • Low Trucks: for wheels 50 to 53 millimeters in diameter;
  • Mid Trucks: for wheels 52 to 56 millimeters in diameter;
  • High Trucks: for wheels 55 to 60 millimeters in diameter;

By selecting trucks of the correct height, you can equip your skateboard with wheels that suit your riding style, while avoiding issues like wheelbite.

Truck Height and Wheel Diameter
Truck HeightWheel Diameter
LOW50 - 53 mm
MID52 - 56 mm
HIGH55 - 60 mm

Lastly, you can fine-tune your truck height by installing riser pads between the deck and the truck baseplate. Check out the selection of riser pads available in our online store.

Quality and Technology of Trucks

Another important factor to consider when purchasing new skateboard trucks is the quality and technology behind them. Let’s take a closer look at what this means.

Trucks are usually made of aluminum, but some manufacturers use other metal alloys, such as magnesium, to make the truck even lighter and stronger. Additionally, some brands offer trucks with a titanium axle, a metal alloy that is both stronger and lighter than aluminum.

Many companies also offer trucks with hollow axles or kingpins, which help reduce weight without compromising durability. Finally, some manufacturers produce trucks with a forged baseplate instead of a cast one. The forged baseplate is crafted from a single block of metal that is pressed and precisely shaped, while a cast baseplate is created by pouring molten metal into a mold. Forged baseplates reduce the truck’s weight without sacrificing strength, making them a popular choice among professional skaters and enthusiasts seeking high performance.

Ensuring that you have lightweight trucks is especially important for younger skaters or beginners. Trucks are the heaviest part of the skateboard, weighing between 300 and 400 grams each. For those who haven’t yet developed strong muscles or refined techniques, lifting the skateboard into the air with an ollie can be challenging. In such cases, investing in lightweight trucks might be a beneficial choice, even though they often come at a higher price compared to heavier trucks.

The weight of each truck available in our store is listed in the product details or description.

How Much Do Skateboard Trucks Cost?

The price of a pair of trucks starts at around 30 euros and varies depending on the technology and materials used in their construction.

Adding a good set of trucks to your skateboard is an investment worth making. Trucks are one of the components that require the least frequent replacement compared to bearings, wheels, or even the deck itself. That’s why it’s wise to choose quality trucks from well-known brands like Independent, Tensor, Royal, Thunder, and Venture. These trucks offer superior performance compared to "commercial" models and are built with durable and reliable materials. While the cost of a quality pair of trucks might be slightly higher, their longevity and reliability make them a worthwhile purchase. Additionally, investing in quality trucks can significantly improve your skating experience by enhancing the board’s stability and maneuverability.

Remember that in our skate shop, all trucks are sold in sets of two, and the prices you see always refer to a pair of trucks.

Essential Accessories for Skateboard Trucks

In our store, you’ll find everything you need to maintain your skateboard. Among the essential accessories for skateboard trucks, you’ll find multi-purpose tools, which allow you to easily adjust the kingpin bolt to control steering and assemble all the components of your skateboard. Additionally, check out our skateboard wax, which will make your new trucks better suited for grinding on both smooth and rough surfaces. In the Hardware section, you’ll also find numerous replacement parts for your trucks, such as screws, nuts, pivot cups, kingpin bolts, wheel nuts, and more.

Mounting Kits

Mounting kits are used to secure the trucks to the skateboard deck. Most kits include 8 screws and 8 nuts for attaching the trucks to the deck. However, it’s important to pay attention to the different available lengths. If you’re not using riser pads, screws of 7/8" or 1" will work just fine (these are the same ones used in pre-assembled skateboards). If you’re using or planning to install riser or shock pads, you should opt for longer screws, between 1.25" and 1.50", depending on the pad height.

There is no functional difference between Phillips-head or Allen-head screws—it’s simply a matter of personal preference.

GO TO SKATEBOARD HARDWARE
Viti e Bulloni per Skateboard

Multi-Purpose Tools

Chiave multiuso per Skateboard

In the Skateboard Tools section of our store, you’ll find a wide selection of multi-purpose tools. These tools allow you to not only adjust the kingpin bolt on your trucks but also quickly assemble and disassemble your skateboard.

We recommend always carrying a multi-purpose tool with you for quick fixes during your skate sessions.

GO TO SKATEBOARD TOOLS

Riser Pads and Shock Pads

Riser pads are plastic spacers placed between the deck and the truck baseplate. Their main purpose is to increase the distance between the deck and the truck axle, allowing you to mount larger wheels. For example, you can install wheels with a larger diameter even if you have Low trucks.

Shock pads, on the other hand, are designed more for absorbing impacts and providing smoother landings than for increasing the distance between the deck and the wheels. Shock pads are made of rubber and are relatively thin, usually about 1/8″ thick; therefore, screws of 1" to 1.25" are recommended when using them.

GO TO SKATEBOARD RISER PADS
Riser Pad per Skateboard

More Information About Skateboard Trucks?

If you have any questions or concerns about which trucks are best for your skateboard, don’t hesitate to contact us. We’ll be happy to help you choose the perfect trucks for your setup!

Filters

Brand

On sale

Price

€20.00 - €140.00

Main Color

Axle truck

Truck height

Truck Profile Height (mm)

Truck technologie

Truck type

Surf Truck type

Bushing Hardness

Show/hide more options

Model name

Pro Skater

Product added to wishlist
Product added to compare.